Maker’s Standard Products

TAPTITE2000® is a registered trademark of reminc Conti.With high added values such as self-tapping, low torque, work efficiency, loosening prevention effect, etc. Including aluminum die-casting, corresponding to various plate materials.

ALtracs® is a registered trademark of EJOT CORPORATION.Tapping screw for light alloy. The axial force equal to or higher than that of small screws and bolts is ensured, and stable joining for a long time is achieved.

For hard materials such as high-tensile steel plates, the thread and cross hole are hard for settling, and smooth joining is realized without cam-out.

TAPTITE® is a registered trademark of reminc Conti.Typical self-tapping screw that screws itself into the other material while plastic-forming the internal thread in it.

Jyushitite® is a registered trademark of YAMASHINA CORPORATION.Tapping screw for resin. For the boss cracking whitening phenomenon, to prevent loosening of the screw.

DELTA PT® is a registered trademark of EJOT CORPORATION.All-purpose resin screw capable of joining repeatedly with good grip performance.

STRUX® is a registered trademark of Acument tellectual Properties,LLC.Caulking bolt with the pressurized mounting method. For between different metals, and for joining non-weldable materials.

THINCA® is a registered trademark of YAMASHINA CORPORATION.Sheet dedicated screw that is easy for torque setting, but hard to loosen. Contributes to idling after seating, looseness, weight saving, and cost reduction.

EVATITE® is a registered trademark of YAMASHINA CORPORATION.High-performance screw that achieves a comfortable working environment by low torque.

Torx® is a registered trademark of Acument tellectual Properties,LLC.Prevents cam-out by unparalleled fitting due to distinctive star-shaped recess. Also with the tamper-proof effect.

LABYLOCK® is a registered trademark of UNION SEIMITSU Co., Ltd.Provides a waterproof effect by the multi-row airtight chamber “air packing” of the back of the seat surface.

Cost reduction type locking screw for which thread lock agent is unnecessary. Provides a looseness prevention effect with the distinctive thread enhancing the spring effect. With adoption records of f1 for a large diameter and f4 for a small diameter.

Low head (thin-head) screw that supports the thin type product and lightweight design.

Micro size hexagonal weld nut. * Sample is made from stainless M1.0.

Micro size DIN standard hexagon nut. * Sample is made from stainless M1.1.

Nut with tapered nylon ring for the locking function on the metal nut body.

Insert nut for resin. High holding power is ensured by the function of the outer peripheral groove. Attachable to thin sheets, which is hard for other parts. * Reference value, the thickness 1.3 t

Nuts can be attached not only to the steel base material but also to the plate materials unsuited for a variety of welding by the press fitting method.

Clinching nut that is attachable to hard materials such as high-tensile materials.

With respect to the lower hole on the metal plate, capable of vertical tapping simply by press fitting.